QUOTE (colmoneill @ Jun 30 2013, 11:17 PM) <{POST_SNAPBACK}>About time I started doing this... I'm doing a mk2 gti conversion to a mk4 golf engine, dash, complete wiring loom, brakes and full respray. I have the car about 2 years now and have been working at it on and off since then. Don't have many pictures of the car in the early days but lots since the start of this year. Any tips are welcome. How do I upload photos, there too big??

Wrong section too!! Needs too go to projects if possible?

 

Iv used the mk4 heater box with ac, 130bhp pd engine and 6 speed box from a 03 golf, custom drive shafts, abs, cruise control, air bags etc. Gt Tdi front heated seats and back seats fitted, mk4 brakes with adapted caliper carriers on the front, corrado vr6 rad and sprinter intercooler, All the car except for mk4 loom has been together and stripped again for painting. A few more pictures

 

serious work gone in to that fair play

 

Few more pictures lads

Ready to go in for the last time..

 

After its first trip for paint

 

New sill fitted to this side

Engine in place

The start of the wiring

 

Sound deadening..

 

 

 

Who needs words when you got pictures like that.
Keep up the good work.

 

Nice work !

 

more updates

details on the build?

progress so far is great,

 

Struggling to upload photos so have almost given up trying. Progress is slow at the moment
but im getting there. Almost ready to go for its final coat of paint just a few small jobs to do.
Most of the hard work is done at this stage so should get it together quick enough when
the paint job is finished. I will try once more to upload photos

 

Photobucket is the easiest way to gofor photos, best thing once their on there you don't have to worry about tge computer crashing and losing everything.

Serious work goin on, looking forward to the finished probuct.

 

It has power

 

Fits in well after a bit of time spent rerouting some of the wiring and putting new tape on..

 

Some of new brake pipe

 

Snug fit

 

Aircon rad needed to be chopped to allow the front panel too fit, anyone know of some where I could get flexi hoses made for this??? it is slowing me down!

 

Front end together with a bunch of wires for the fans to be figured iv scratched my head for many hours with this and
still got no where. New arb fitted to the front and a big 1 inch bar for the back to keep it level in the corners

 

That's a serious amount of work, fair play to you

 

Here is a link to all the pictures of the golf I have on dropbox,
hopefully this will work and should update fairly often
as im always taking new pictures
Visit My Website

And just to note the bottom of the steering column to the rack is now changed.

 

Not much done over the last week or two other
than the final trimming of the dash and sealing it back up.
Pictures are uploaded to the link on the previous post.
Dropped the car for the rest of the paint job today so wont
have much updates or pictures for a few weeks

 

Got the car back yesterday painted and ready to be put back together. More pictures on the link I posted a few comments before this one.

 

that looks brilliant keep up the good work .I will have to drop in some day over the summer that is some job .I am still putting the fiat 127 together best of luck with it