Volkswagen Automobiles Forum banner
1 - 20 of 47 Posts

·
The Lego Man
Joined
·
4,021 Posts
Picked this up from Murph friday,





Only bought the shell so myself and Murph got bizy,





Not normally a fan of 5doors but going for a bit of a sleeper with this. Car has had alot of work done to it already and came with a pile of extras so well happy.

Plan is to convert it to hydro clutch,use what i can of the rpm 16v kit and fit everything else i have sitting on the shelf.

Shes gona be bog standard on the outside, standard exhaust, small bumper and not sure about wheels yet.

More pics,

Referb reax axle,


Automec brake line kit,


Random pics,




The engine,




Rmp 16vG60 conversion kit,


G60 intercooler,


Other bits done by Murph,
- elec windows.
- all gl cream trim with the black gti trim including black carpets.
- larger servo from 16v.
- mk3 gti tank with in tank pump + fuel filter.
- wishbones, subframes, axle, crossmembers, hubs and tank straps sandblasted and painted with rustbullet.
- front and rear wheel bearings, new rear discs, cacking plates and stub mounting bolts, fitted new mk4 hoses and calipers.
- new tie rods and track rod ends, bottom ball joints and fitted polybushes.
- new H&R Cupkit with new topmounts, bumpstops and dustcovers all round.
- new headlights with Osram bulbs.

{Ignore links,for my own reference}
For sale add
Murphs Build
Murphs for sale add
Link to rpm tuning
Ce2 wiring
Alternator Mounting Pic's
 

·
Registered
Joined
·
14,417 Posts
Like it Paudie. By looks of things it won;t take too long either.
 

·
Premium Member
Joined
·
2,781 Posts
Good stuff.

If your last one is anything to go by this will be savage.

Best of luck.
 

·
Registered
Joined
·
4,584 Posts
hehe
 
G

·
Good man Paudie!

Didn't realise you had a different inlet for it, did you suss out if you can keep the pas?
 

·
The Lego Man
Joined
·
4,021 Posts
Discussion Starter · #16 ·
Thanks lads


Yea long bracket on the left and chunky one top right are to mount the alt at the rear in a lhd car.

I'll be putting it under the charger using the "bracket"{not sure what to call it} in the bottom right in the pic above

Have power in the shed again,massive clean up and clear out earlyer that i'll finish up tomorrow.

Should get the engine stripped sat or at least get the stripping started!
 

·
Registered
Joined
·
118 Posts
Nice project, 16v G60, will be keeping a close eye on this
 
1 - 20 of 47 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top