Volkswagen Automobiles Forum banner

Big Brake Conversion! Help

1K views 12 replies 3 participants last post by  Glenn 
#1 · (Edited by Moderator)
heres the problem.....

i currently have a 1.4 mk3 golf...... vr6 powered.
i have the remainder of the vr6 at hand, is there any way i can fit the callipers and carriers to my car, and buy 4 stud discs to fit, as the vr6 discs are 5 stud.

can i fit 1.8 turbo cupra ibiza discs to these callipers (as these are 4 stud)??
or can i buy 4 stud discs to suit?

Cheers

Chris
 
#9 ·
My money would be on them being 280s to be honest. As Glenn says look at the caliper, if the brake hose scews in they are 280s, if it is held on with a banjo bolt then they are 288s

All except the very early VRs were coilpack Glenn, the (93) Vento is coilpack (though how would you know that having never done anything with the engine
)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top