Volkswagen Automobiles Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
253 Posts
Discussion Starter · #1 ·
mk1 1.1 shell, has anyone worked on one,

there is no anti-roll bar on these shells,

have a donar anti-roll bar but how is it put

on correctly?

Do i have to make any other mods for a heavier

engine or is the rest the same as any other shell??

Thanks again!
 

·
Registered
Joined
·
253 Posts
Discussion Starter · #3 ·
I'll have to relocate that mount all-rite,

is the anti-roll bar held on by brackets which

welded on to the shell?
 

·
Registered
Joined
·
8,655 Posts
They bolt on!
 

·
Registered
Joined
·
1,767 Posts
The anti roll bar on the front is connected to both wishbones, (you should have holes on the wishybones for this...) and where the wishbones are held to the chassis towards the back of the car, there's an extra 'antiroll bar holder'. Easily changed. Can be got from scirocco/mk1 GTi and possibly more?!?!?

QUOTE is the anti-roll bar held on by brackets which

welded on to the shell?
No. If you look at the U brackets thats holding the wishbones to the chassis(towards the rear) now---> two bolts and its off. You need to change that. The new brackets will do the wishbone holding and ALSO antiroll bar.

Hope this helps?
somehow....
 
1 - 6 of 6 Posts
Top